// Replacing the HT lead (Coil to Spark Plug Cap)

The lead is removable from the coil, but the coil is inside the frame, access is obtained via the battery side cover, removing the battery & the carrier, the coil is held on by 2 x 10mm head nuts, attached from the other side, under the side panel.

The lead comes away after unscrewing the plastic retaining nut.
Make sure that you get a copper stranded HT cable & NOT the silicone type...
You can just snip off approx 1/4" for a better contact!

Courtesy of www.fuzzibitz.8m.com & members of www.cubc90.co.uk